Blade
5ar
Blade
5ar
Fresatrice sagomatrice
a 5 assi interpolati
Un centro di lavoro che in un unico spazio permette di effettuare tutte le lavorazioni richieste a un laboratorio sia di piccole che di medie dimensioni.
Blade 5ar è un centro di lavoro a controllo numerico a 5 assi per elementi architettonici e piani, in grado di lavorare su diversi materiali come pietra naturale, quarzo, ceramica, vetro e materie plastiche. La macchina mette a disposizione dell’operatore molte opzioni come fresatura, intaglio e produzione di piani.
Blade 5ar è dotata di un elettromandrino con una coppia elevata in grado di poter utilizzare dischi di grandi dimensioni per i tagli a spessore. Può essere dotata di attacco per tornio, tavoli di alimentazione in entrata e in uscita, nonché di un sistema a ventosa per lo spostamento di pezzi tagliati: ottimizzare il taglio significa ridurre al minimo gli scarti di materiale e quindi non intervenire manualmente durante le fasi di taglio.
Grazie alla macchina fotografica digitale è possibile memorizzare lastre di qualsiasi materiale. Con l’attivazione della funzione VEIN, la progettazione e il taglio possono essere eseguiti rispettando le venature del materiale di diverse lastre. L’immagine acquisita è in grado di identificare automaticamente i contorni della lastra e quindi riconoscerne le misure.
Blade 5ar può essere costruita in molte configurazioni personalizzate tra cui tavoli doppi, in movimento, diverse dimensioni e strumenti.
1. Attacco utensile automatico
L’attacco utensile ISO50, automatico, consente di poter effettuare lavorazioni quali forature, incisioni di lettere, sculture, profilature con utensili
2. PC di comando
PC di comando da 19” touch screen. Le grandi dimensioni dello schermo permettono una visione dettagliata sia delle funzioni che delle geometrie dei pezzi da lavorare
3. Foto fast
La macchina fotografica digitale permette di bilanciare i colori, ottimizzare luminosità e contrasto, rimuovere ombre, identificare le zone che non devono essere considerate
4. Sistema a ventosa
SAMR è il sistema a ventosa in grado di spostare i pezzi tagliati o di tagliare sia sul tavolo di lavoro che su rulliere di scarico
Fastcut
Le geometrie di taglio possono essere importate sia in formato standard DXF CHE in formato CVS. Si passa poi al posizionamento nella lastra di taglio dei singoli elementi. La funzione Nesting esegue questa operazione automaticamente. Il tavolo di appoggio, a nastro, ruotando fa sì che tutte le combinazioni di taglio siano possibili.
Planprobe
Con il tastatore di planarità (PLANPROBE/TOUCH2D) si memorizza automaticamente lo spessore della lastra. Questa funzione permette un taglio preciso, in particolar modo per i tagli a 45°
Radiusprobe
Il tastatore utensile (RADIUSPROBE/PRESETTING) fa in modo che l’operatore dell’impianto si limiti a impostare nella tabella utensili le misure del disco o dell’utensile a profilo, mentre la tecnologia della macchina autonomamente verifica, controlla e aggiorna i dati reali, particolarmente utile in caso di usura del disco
Blade
5ar
Blade
5ar
5 axes interpolated
Shaping Milling machine
A cnc working center that in a single space allows to carry out all the processes required to a small or medium-sized laboratory.
Blade 5ar is a 5-axis numerical control machining center for architectural and flat elements, capable of working on different materials such as natural stone, quartz, ceramic, glass and plastics. The machine offers the operator many options such as milling, carving and production of plans.
Blade 5ar is equipped with an electrospindle with a high torque able to use large discs for thick cuts. It can be equipped with a lathe attachment, infeed and outfeed tables, as well as a suction cup system for moving cut pieces: optimizing cutting means minimizing material waste and therefore not manually intervening during the cutting phases.
Thanks to the digital camera it is possible to memorize slabs of any material. By activating the VEIN function, design and cutting can be performed respecting the grain of the material of different slabs. The acquired image is able to automatically identify the contours of the slabs and therefore recognize the measures.
Blade 5ar can be built in many customizes configurations including double tables, moving tables, different sizes and tools.
1. Attacco utensile automatico
The ISO50 automatic tool attachment allows to perform processes such as drilling, letter engraving, sculptures, profiling with tools
2. PC control
PC Control 19” touch screen. The large screen size allows a detailed view of both the functions and the geometries of the pieces to be performed
3. Foto fast
The digital camera allows to balance colors, optimize brightness and contrast, remove shadows, identify areas that should not be considered
4. Suction cup system
SAMR is the suction cup system able to move the cut pieces or cut both on the work table and on the unloading rollers
Fastcut
Cutting geometries can be imported both in standard DXF and CVS format. We then move on to the positioning of the individual elements in the cutting plate. The Nesting function does this automatically. The support table, with belt, by rotating means that all cutting combinations are possible.
Planprobe
Con il tastatore di planarità (PLANPROBE/TOUCH2D) si memorizza automaticamente lo spessore della lastra. Questa funzione permette un taglio preciso, in particolar modo per i tagli a 45°. With the plan probe (PLANPROBE / TOUCH2D) the thickness of the slab is automatically memorized. This function allows a precise cut, especially for 45° cuts.
Radiusprobe
The tool probe (RADIUSPROBE/PRESETTING) ensures that the operator of the plant simply sets the measurements of the disc or of the profile tool in the tool table, while the technology of the machine autonomously checks, checks and updates the real data, particularly useful in case of wear of the disk.
Blade
5ar
Blade
5ar
Konturfräsmaschine
mit 5 interpolierten Achsen
Ein Bearbeitungszentrum, das die Durchführung aller Bearbeitungen, die in kleinen und mittelgroßen Betrieben erforderlich sind, mit einer Maschine erlaubt.
Blade 5ar ist ein CNC-Bearbeitungszentrum mit 5 Achsen für die Fertigung architektonischer und flacher Elemente und eignet sich für die Bearbeitung unterschiedlicher Materialien, wie Naturstein, Quarz, Keramik, Glas und Kunststoff. Die Maschine bietet dem Bediener viele verschiedene Optionen, wie Fräsen, Schneiden und die Fertigung von Platten.
Blade 5ar ist mit einer Elektrospindel mit hoher Drehzahl ausgerüstet, die sich für die Verwendung von Trennscheiben mit großen Abmessungen eignet, die für das Schneiden dicker Materialien erforderlich sind. Außerdem kann das Bearbeitungszentrum mit einer Werkzeugaufnahme für Drehwerkzeuge, einem Belade- und Entladetisch und einem System mit Saugköpfen für das Bewegen der geschnittenen Teile ausgerüstet werden. Die Optimierung des Schneidens bedeutet, dass der Materialverschnitt auf ein Minimum reduziert wird und deshalb in der Schneidephase kein manuelles Eingreifen mehr erforderlich ist.
Mit der digitalen Kamera können Platten aus beliebigen Materialien gespeichert werden. Die Aktivierung der Funktion VEIN können die Planung und der Schnitt unter Berücksichtigung der Äderung bzw. Marmorierung der verschiedenen Platten durchgeführt werden. Anhand der aufgenommenen Bilds erkennt die Maschine automatisch die Plattenumrisse und damit die Abmessungen.
Blade 5ar kann in vielen kundenspezifischen Konfigurationen gebaut werden, wie zum Beispiel mit doppelten Tischen in Bewegung, mit unterschiedlichen Abmessungen und mit einer unterschiedlichen Instrumentenausstattung.
1. AUTOMATISCHE WERKZEUGAUFNAHME
Die automatische Werkzeugaufnahme ISO50 erlaubt Bearbeitungen wie Bohren, Gravieren von Buchstaben, Formen und Profilschneiden mit Werkzeugen
2. PC MASCHINENSTEUERUNG
PC Maschinensteuerung mit 19″ Touchscreen. Die großen Abmessungen des Bildschirms erlauben deine detaillierte Anzeige der Funktionen und der Geometrien der Werkstücke in Bearbeitung
3. FOTO FAST
Die digitale Kamera erlaubt das Ausgleichen der Farben, die Optimierung von Helligkeit und Kontrast, das Beseitigen von Schatten und die Identifizierung der Bereiche, die nicht berücksichtigt werden müssen
4. SYSTEM MIT SAUGKÖPFEN
SAMR ist ein System mit Saugköpfen, das das Bewegen der geschnittenen Werkstücke oder der Werkstücke, die geschnitten werden sollen, sowohl auf dem Arbeitstisch als auch auf der Rollenbahn am Ausgang erlaubt
Fastcut
Die Schnittgeometrien können sowohl im DXF-Standardformat importiert werden, als auch im CVS-Format. Anschließend werden die einzelnen Teile auf der Platte verschachtelt (Nesting), die geschnitten wird. Das Nesting erfolgt mit einer automatischen Funktion. Der Auflagetisch mit Gurt ist drehbar, sodass alle Schnittkombinationen möglich sind.
Planprobe
Mit dem Ebenheitstaster (PLANPROBE/TOUCH2D) wird automatisch die Plattendicke gespeichert. Diese Funktion erlaubt einen präzisen Schnitt, insbesondere bei 45° Schnitten.
Radiusprobe
Der Werkzeugtaster (RADIUSPROBE/PRESETTING) ermöglicht, dass sich der Maschinenbediener darauf beschränken kann, in die Werkzeugtabelle nur die Abmessungen der Trennscheibe oder des Werkzeugs einzugeben. Die Maschine prüft, kontrolliert und aktualisiert die Istwerte des Werkzeugs dann automatisch, was insbesondere bei Verschleiß der Trennscheibe sehr praktisch ist.